Thanking you with Regards.

Shashank Vaidya

Can you provide cost and timing to provide the following alumina balls for my evaluation?
 
Material                              Qty (wt in Kg)                Diameter (mm)
High Alumina 95 Series              25                                 20
High Alumina 95 Series              25                                 25
High Alumina 95 Series              25                                 30
Inert Alumina Balls                    25                                 25
 
Also please provide a quotation for each of these grades in $(USD) per metric ton.
 
Best regards,
 
Alumina ball products, alumina grinding media, alumina support media inquiry provided by China alumina ball manufacturer: HuaMing Alumina Technology Ltd.

Upon request of client, the spec. as below:

Item : Activated alumina ball
Dimension : 1/8”
Abrasion loss : 0.2 wt%
LOI( loss on ignition ) 0~300 degree C : 0.5 wt%
LOI ( loss on ignition ) 300~1100 degree C : 6.5 wt%
Surface area : 336.1 m2/ g
Crush strength : 18 kg
Bulk density : 0.78 g/ cm3
Quantity : 120 ton as one shipment

The client concern about the absorption ability, the balls is applied to absorb water and TBC both, can you please offer it?

This is one open bid for activiated alumina ball business. Hope this is useful to you, thanks.

HuaMing Alumina, China

Refer to our inquiry no. 09055 for alumina ball, the qualify vender should confirm us your offer spec. and our requirements as below by filling in yes or no and retun it to us. If your reply is no, kindly please help to explain why. Thank you so much for your help in advance.

Specification and general requirements
Item Specification Requirements Your offer Remark
1 Type Alumina ball yes
2 Size diameter and quantity requested —
2.1 3000 kg 1/8″
2.2 19000 kg 1/4″
2.3 26000 kg 3/4″
3 Chemical composition —
3.1 Al2O3 > = 90 WT%
3.2 Fe2O3 < = 1.0 WT%
3.3 Na2O < = 1.0 WT%
3.4 MgO < = 1.0 WT%
3.5 CaO < = 1.0 WT%
4 Crushing strength ---
4.1 Crushing strength for 1/8" size >= 28 kg/ per ball
4.2 Crushing strength for 1/4″ size >= 28 kg/ per ball
4.3 Crushing strength for 3/4″ size >= 28 kg/ per ball
5 Appearance White
6 bulk density Please stated in your quotation.
7 chemical and physical property analysis reports Please attach along with your quotation, see note 2
8 packing request see note 1
9 Experienced client referenc list including Taiwan clients or oversea clients.
10 MSDS( material safety data sheet ) documents be requested when shipment
11 Maker’s inspection certificate when delivery.
12 The goods should be ETA Taiwan seaport: Before or on May 18,2009
13 Experienced client referenc list
14 Payment term 100% of the contract amount will be paid by L/C after final acceptance by client. See note 3
15 validity of quotation Before or on April 26,2009
16 SGS test cost for crush strength and Al2O3 wt% analysis

Note 1 Packing requirement : The commodities shall be packed in brand new steel or fiber drum and palletized.
Note 2 Test reports : All the items listed in item 3 to item 6 as above shall be attached along with your quotation.
Note 3 If the maker failed to meet any of performance or physical properties rquriementa stated in the specification druing the testing done by client by RMRC, the maker will have to adjust the formula to meet the requirement without any condition or the vendor should accept claim , the amount is in an amount equal to 2% of contract price, as a whole or of the portion, if properties can not meet any two items of specification the clain amount will increase to 4%, if exceeding three items, the claim amount will increase to 8%.

Webmaster

HuaMing Alumina, China